Kent Roof Pros
Call (844) 511-2320

Kent, WA Metal Roofing — Residential & Commercial

Metal Roofing in Kent, WA

Kent Roof Pros provides professional metal roofing in Kent, WA for residential and commercial properties across the Green River valley and south King County. Standing seam metal is a genuinely good roof and it is the wrong purchase for a particular kind of Kent house. Knowing which kind you have before you spend the money is the whole point of this page. The deck under it decides which one you are.

The case for it is real. A concealed-fastener panel system weighs a fraction of what a tile roof weighs, sheds water at very low pitches, has no granules to lose and no tabs to lift, and in a climate that keeps roofs damp for months it gives organic growth almost nothing to hold onto. On a simple gable with long, uninterrupted runs, it is a very long-lived decision. Longevity is the honest selling point.

The case against it is the deck. Metal telegraphs. A long flat panel reflects light along its whole length, so every dip and every proud sheathing edge underneath it shows as a visible wave, and on a valley-floor house whose deck plane has settled unevenly, standing seam will display that settlement to the whole street in a way shingles never do. Shingles forgive a wavy deck. Metal advertises it.

So the order of operations matters. We measure the deck before anyone talks about colors. If the plane is within tolerance, panels go on over a high-temperature underlayment on clips that let them expand and contract, and it is an excellent roof. If it is not, re-planing the deck first is part of the price, and we will tell you what that adds. Color is the last decision, not the first.

Detailing decides the rest. Panels want continuous runs to the eave, ribs kept out of valleys, and pipe penetrations handled with a boot sized to the rib profile rather than a flat collar squashed onto a standing rib and buttered with sealant. Ridge and hip closures want a formed profile filler instead of a bead of sealant, since sealant in this climate is a maintenance item with a short life.

We install corrugated and exposed-fastener panels too, on outbuildings, shops and agricultural structures out toward the river, where the economics are different and a screwed-down panel with washers is honest value. On a house we would rather sell you a concealed clip system or a good laminate shingle than an exposed-fastener roof with a thousand gaskets waiting to age. We would rather sell a smaller job that lasts.

Our licensed and insured team brings the right materials and equipment to every job — Class A laminated asphalt shingles set on a six-nail pattern, self-adhered ice and water membrane at eaves, valleys and penetrations, tapered polyisocyanurate laid to a re-surveyed drainage plane, two-ply SBS modified bitumen at porch and addition tie-ins, concealed-clip standing seam panels over high-temperature underlayment, sheathing re-planed with ripped cedar shims before underlayment goes down — and backs the work with a written workmanship warranty. We serve Kent and nearby communities including Auburn, Federal Way, Renton, Tukwila.

What We Handle

Everything our metal roofing in Kent covers

One crew, one point of contact, and the full range of metal roofing work in Kent, WA. If it is on this list we do it in house rather than handing it to a subcontractor:

  • metal roofing kent wa
  • standing seam roof kent
  • concealed fastener metal roof kent wa
  • metal roof cost kent
  • exposed fastener panel roof kent wa
  • metal roof over deck kent
  • oil canning standing seam kent wa
  • metal roofing king county
  • shop and barn metal roof kent wa
  • metal roof installation kent
  • snap lock metal panels kent wa

Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Kent services.

Materials, equipment and how we do metal roofing

The difference between metal roofing that lasts and metal roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with Class A laminated asphalt shingles set on a six-nail pattern, self-adhered ice and water membrane at eaves, valleys and penetrations, tapered polyisocyanurate laid to a re-surveyed drainage plane, two-ply SBS modified bitumen at porch and addition tie-ins, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.

Every Kent job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the Green River valley and south King County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.

Where we do metal roofing outside Kent

Kent Roof Pros covers Kent and the surrounding communities of the Green River valley and south King County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.

Start on the Kent Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.

Why Kent Chooses Kent Roof Pros

  • ✓We establish which ground your address sits on, valley fill or glacial hillside, before a specification is written, because the two need different roofs
  • ✓Ridge and eave offsets are measured and recorded on the first visit and again at completion, so the file shows whether anything is still moving
  • ✓We decline coating work where the ponding traces back to building settlement, and we put the reason in writing rather than taking the job quietly
  • ✓Nobody here will write a hail claim on a Puget lowland roof. We chalk a test square, count the hits and give you the number even when it kills the job

The standards behind metal roofing

Quality here is not a matter of opinion — it is written down. The metal roofing work we do in Kent follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.

Every metal roofing project in Kent gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.

Ready to get started? Call (844) 511-2320 for a free metal roofing free estimate in Kent, or request a quote and we'll get right back to you.

Related Services

Metal Roofing in Kent: Common Questions

How much does metal roofing cost in Kent, WA?

It comes down to square footage, access, the condition of what is already there, and the materials you choose — Class A laminated asphalt shingles set on a six-nail pattern, self-adhered ice and water membrane at eaves, valleys and penetrations, tapered polyisocyanurate laid to a re-surveyed drainage plane.

We do not price a job off a phone call and a guess. We measure on site and hand you an itemized free estimate with the scope written out, so you can compare it line by line against anyone else's number.

How long does a metal roofing job take?

Most residential metal roofing work in Kent runs from a single day to about a week once materials are on site. Larger commercial jobs get phased so the property keeps operating. Weather, permit review and material lead times are the usual reasons a date moves, and you hear about those from us before the crew starts, not after.

Do you pull permits and handle inspections in Kent?

Yes, on any work that needs one. We file with the Kent building department, schedule the inspection and stay on site for it. Skipping a permit is how property owners end up paying twice — once for the work, and again when it fails at resale or an insurance claim.

Is Kent Roof Pros licensed and insured?

Registered with Washington State Labor and Industries under chapter 18.27 RCW, and plain about what that means: this state registers contractors rather than examining them, so nobody sat a roofing test to obtain it.

Since 1 July 2024 the surety bond filed under RCW 18.27.040 has been 30,000 dollars for a general registration and 15,000 dollars for a single-trade specialty registration. Ask us for the registration number and read the bond, the expiry date and the claim history yourself on the Labor and Industries Verify tool..

General liability and property damage limits carried far above the statutory floor, which RCW 18.27.050 still leaves at 200,000 dollars per injury claim and 50,000 dollars for property damage, alongside Washington workers compensation through Labor and Industries. Ask, and our insurer sends the certificates to you direct.. National Roofing Contractors Association member.

The more useful record, though, is at the City of Kent Permit Center: every permit on our jobs is taken out in this company's name, so the inspection history attaches to us and can be looked up against your address. Every metal roofing job carries a written workmanship warranty stating its term and its exclusions in plain language.

Ask any contractor for those four things in writing before you sign — the ones who hesitate are telling you something.

Do you take commercial roofing work as well as residential?

Both. Kent Roof Pros runs residential metal roofing across Kent neighborhoods and commercial work for offices, retail, restaurants, apartment complexes and HOA properties throughout the Green River valley and south King County. Commercial jobs get phased scheduling and off-hours crews so tenants and customers are not shut out while the work happens.

Service Areas

Kent Roof Pros serves Kent, WA and surrounding communities including:

Call Now